Saltar al contenido principal
Inglés
Francés

Traduciendo paso 4

Paso 4
Option two is to be used if the key cannot be attached without removing the metal bar. Pull the metal bar gently from one side to unseat it from the keyboard and allow it to be removed. Attach the metal bar to the receivers on the back of the key.
  • Option two is to be used if the key cannot be attached without removing the metal bar.

  • Pull the metal bar gently from one side to unseat it from the keyboard and allow it to be removed.

  • Attach the metal bar to the receivers on the back of the key.

  • Seat the metal bar into the hole on one side, and then the other. Then press firmly to attach the key.

Si il est difficile de placer la touche sur la broche en métal, vous pouvez retirer du clavier la broche en métal.

-[* black] If it is hard to fit the key onto the metal pin, you can remove the metal pin from the keyboard.
+[* icon_caution] Option two is to be used if the key cannot be attached without removing the metal bar.
+[* black] Pull the metal bar gently from one side to unseat it from the keyboard and allow it to be removed.
+[* red] Attach the metal bar to the receivers on the back of the key.
+[* blue] Seat the metal bar into the hole on one side, and then the other. Then press firmly to attach the key.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.