Saltar al contenido principal
Inglés
Español
Paso 5
Like its predecessors, the Droid 3's rear case is held in place by a few T5 Torx screws. Motorola likes to hide screws and latches beneath the information label, making opening the phone a rather sticky affair. Of course, these obstacles are of little challenge to our spudgers, 54-piece bit driver kits, and talented fingers.
  • Like its predecessors, the Droid 3's rear case is held in place by a few T5 Torx screws.

  • Motorola likes to hide screws and latches beneath the information label, making opening the phone a rather sticky affair.

  • Of course, these obstacles are of little challenge to our spudgers, 54-piece bit driver kits, and talented fingers.

  • With the screws unscrewed, the clips unclipped, and the stickers unsticked, we get a full-on exposè of the Droid 3's innards.

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.