Saltar al contenido principal
Inglés
Español
Paso 12
Without getting any dirt or contaminants on the seal you just oiled, maneuver your new oil filter into position. Tighten the oil filter on the threads protruding from the oil filter housing.
  • Without getting any dirt or contaminants on the seal you just oiled, maneuver your new oil filter into position.

  • Tighten the oil filter on the threads protruding from the oil filter housing.

  • To ensure a good seal, tighten the filter about 1/4 turn after the end of the oil filter contacts the housing.

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.