Saltar al contenido principal

Aviso: Estás editando una guía de prerrequisito. Cualquier cambio que realices afectará a todas las 2 guías que incluyen este paso.

Inglés
Italiano

Traduciendo paso 1

Paso 1
Gently slide the flat end of a spudger between the speaker wires and the motherboard until it is resting against the connector. Carefully pry straight up on the speaker wire connector to disconnect it from the motherboard. Be gentle—the speaker wires are delicate.
Remove the left speaker
  • Gently slide the flat end of a spudger between the speaker wires and the motherboard until it is resting against the connector.

  • Carefully pry straight up on the speaker wire connector to disconnect it from the motherboard.

  • Be gentle—the speaker wires are delicate.

  • During reassembly, place the new speaker wire harness on top of the connector on the motherboard and gently press it straight down with your finger to reconnect it.

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

+[title] Remove the left speaker
+[* black] Gently slide the flat end of a spudger between the speaker wires and the motherboard until it is resting against the connector.
+[* black] Carefully pry straight up on the speaker wire connector to disconnect it from the motherboard.
+ [* icon_caution] Be gentle—the speaker wires are delicate.
+[* icon_reminder] During reassembly, place the new speaker wire harness on top of the connector on the motherboard and gently press it straight down with your finger to reconnect it.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.