Saltar al contenido principal

Aviso: Estás editando una guía de prerrequisito. Cualquier cambio que realices afectará a todas las 15 guías que incluyen este paso.

Inglés
Japonés
Paso 4
Remove seven Phillips screws securing the motherboard to the upper case: Four 2.5 mm gold screws Two 3.5 mm black screws
  • Remove seven Phillips screws securing the motherboard to the upper case:

  • Four 2.5 mm gold screws

  • Two 3.5 mm black screws

  • One 2.5 mm silver screw

  • When you remove this screw the volume slider can fall out.

  • Lift the side of the motherboard that sits along the bottom edge of the 3DS.

マザーボードを上部ケースに固定している次の7本のプラスネジを外します。

2.5mmネジ(ゴールド) 4本

3.5mmネジ(黒) 2本

2.5mmネジ(シルバー) 1本

3DSの底部端にあるマザーボードの片側を持ち上げます。

[* black] Remove seven Phillips screws securing the motherboard to the upper case:
[* red] Four 2.5 mm gold screws
[* orange] Two 3.5 mm black screws
[* yellow] One 2.5 mm silver screw
+ [* icon_note] When you remove this screw the volume slider can fall out.
[* black] Lift the side of the motherboard that sits along the bottom edge of the 3DS.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.