Saltar al contenido principal

Aviso: Estás editando una guía de prerrequisito. Cualquier cambio que realices afectará a todas las 15 guías que incluyen este paso.

Inglés
Italiano

Traduciendo paso 1

Paso 1
From here, the repair will be easier if you flip the computer around so the base is facing you.
  • From here, the repair will be easier if you flip the computer around so the base is facing you.

  • Remove the following four screws:

  • One 9.3 mm T10 Torx screw with a large head

  • Three 9.3 mm T10 Torx screws with a normal sized head

From here, the repair will be easier if you flip the computer around so the base is facing you.

Rimuovere le quattro viti seguenti:

Una vite Torx T10 da 9,3 mm a testa grande

Tre viti Torx T10 da 9,3 mm a testa normale

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.