Saltar al contenido principal
Inglés
Español
Paso 2
Remove the 4 Torx T10 screws and gently lift the lefts side up and angle the power supply as shown in the second photo. The bottom right screw is a metal thread screw,  all the others are a coarse thread self tapper
  • Remove the 4 Torx T10 screws and gently lift the lefts side up and angle the power supply as shown in the second photo.

  • The bottom right screw is a metal thread screw, all the others are a coarse thread self tapper

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.