Saltar al contenido principal

Aviso: Estás editando una guía de prerrequisito. Cualquier cambio que realices afectará a la guía que incluye este paso.

Inglés
Francés
Paso 13
Use a spudger to gently remove the camera retaining clip, (formerly secured by the removed screw) and gently pry the camera up and out of its housing in the rear panel. The camera cannot be removed entirely yet because it's connected to the bottom of the logic board.
  • Use a spudger to gently remove the camera retaining clip, (formerly secured by the removed screw) and gently pry the camera up and out of its housing in the rear panel. The camera cannot be removed entirely yet because it's connected to the bottom of the logic board.

A l'aide d'une spatule (spudger), retirez délicatement le clip (auparavant maintenu par la vis) qui retient la caméra et soulevez soigneusement la caméra hors de son emplacement dans le boîtier arrière. La caméra ne peut pas encore être retirée complètement, car elle est encore reliée à la partie inférieure de la carte mère.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.