Saltar al contenido principal

Aviso: Estás editando una guía de prerrequisito. Cualquier cambio que realices afectará a todas las 30 guías que incluyen este paso.

Inglés
Francés

Traduciendo paso 1

Paso 1
Unplug your iMac's AC cord along with any peripheral devices. Lay your iMac face-down on a soft, clean surface as shown.
  • Unplug your iMac's AC cord along with any peripheral devices.

  • Lay your iMac face-down on a soft, clean surface as shown.

  • Be sure there isn't any dirt or debris on your work surface, as it may scratch the glass panel on the front of your iMac. We recommend placing a towel between the iMac and the work surface.

  • Loosen the three Phillips screws securing the access door to the bottom edge of your iMac.

  • All three screws will remain captive in the access door.

  • Remove the access door.

Posez l'iMac à l'envers sur une surface propre et douce.

Veillez à éliminer la poussière et les débris sur la surface de travail afin de ne pas rayer la vitre de l'écran de l'iMac. Nous vous recommandons de placer un torchon entre l'iMac et la surface de travail.

Desserrez les trois vis Phillips par lesquelles la trappe d'accès est fixée en dessous de votre iMac.

Les trois vis captives restent intégrées à la trappe d'accès.

Retirez la trappe d'accès.

+[* black] Unplug your iMac's AC cord along with any peripheral devices.
[* black] Lay your iMac face-down on a soft, clean surface as shown.
[* icon_caution] Be sure there isn't any dirt or debris on your work surface, as it may scratch the glass panel on the front of your iMac. We recommend placing a towel between the iMac and the work surface.
[* red] Loosen the three Phillips screws securing the access door to the bottom edge of your iMac.
[* icon_note] All three screws will remain captive in the access door.
[* black] Remove the access door.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.