Saltar al contenido principal
Inglés
Italiano
Paso 2
With the battery facing up (battery connector on the right), carefully align the exposed portion of the adhesive strips along the lower edge of the front of the battery, and press them gently into place. Take care to line up the strips correctly the first time. Once they adhere to the battery, they can't be removed and reused—you'll have to start over with fresh strips. Take care to line up the strips correctly the first time. Once they adhere to the battery, they can't be removed and reused—you'll have to start over with fresh strips.
  • With the battery facing up (battery connector on the right), carefully align the exposed portion of the adhesive strips along the lower edge of the front of the battery, and press them gently into place.

  • Take care to line up the strips correctly the first time. Once they adhere to the battery, they can't be removed and reused—you'll have to start over with fresh strips.

Con la batteria rivolta verso l'alto (connettore della batteria sulla destra), allineare attentamente la parte esposta delle strisce adesive lungo il bordo inferiore della parte anteriore della batteria e premerle delicatamente in posizione.

Fai attenzione ad allineare correttamente le strisce la prima volta. Una volta che aderiscono alla batteria, non possono essere rimosse e riutilizzate: dovrai ricominciare con le nuove strisce.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.