Saltar al contenido principal
Inglés
Español

Traduciendo paso 3

Paso 3
Place the new scanner head in the scanner tray by fastening the drive belt into the black tab. Make sure the tab on the outer portion of the gray drive belt is fastened.
Adding New Scanner Head
  • Place the new scanner head in the scanner tray by fastening the drive belt into the black tab.

  • Make sure the tab on the outer portion of the gray drive belt is fastened.

  • Once the drive belt is secured, rotate the scanner head back into position.

  • Re-attach the white ribbon wire to the connection from Step 10.

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.