Saltar al contenido principal
Inglés
Español
Paso 2
Start by removing all coffee beens from the container. Remove the screw in the middle of the bean container protection and remove the bean container protection. Remove the three screws of the been container and remove the been container.
Removing the bean coffee container and the upper casing cover
  • Start by removing all coffee beens from the container.

  • Remove the screw in the middle of the bean container protection and remove the bean container protection.

  • Remove the three screws of the been container and remove the been container.

  • Use a magnet to get them up so that you don't drop them into the grinder hole.

  • You can now remove the upper casing cover by pulling it up gently (picture 2).

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.