Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Aviso: Estás editando una guía de prerrequisito. Cualquier cambio que realices afectará a todas las 3 guías que incluyen este paso.

Inglés
Español

Traduciendo paso 1

Paso 1
Remove the four H2 screws from the back of the phone. Do not lose the black rubber rings on the screws. Remove the two H2 screws, on either side of the phone. Do not lose the red seal that are on the screws. Using a prying tool work off the back of the case. Ensuring not to lose the port covers. Be careful to note the position of connector covers. Have the tabs at the end of the connectors in place before clipping the phone completely back together.
Outer Case
  • Remove the four H2 screws from the back of the phone. Do not lose the black rubber rings on the screws.

  • Remove the two H2 screws, on either side of the phone. Do not lose the red seal that are on the screws.

  • Using a prying tool work off the back of the case. Ensuring not to lose the port covers. Be careful to note the position of connector covers. Have the tabs at the end of the connectors in place before clipping the phone completely back together.

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.