Saltar al contenido principal

Aviso: Estás editando una guía de prerrequisito. Cualquier cambio que realices afectará a todas las 7 guías que incluyen este paso.

Inglés
Chino
Paso 10
Use the tip of a spudger to pry the right speaker connector up and out of its socket on the logic board. Be sure to pry on the cable connector and not on the socket on the logic board. Prying on the socket may cause it to separate from the logic board. Gently fold the cable up and out of the way of the logic board.
  • Use the tip of a spudger to pry the right speaker connector up and out of its socket on the logic board.

  • Be sure to pry on the cable connector and not on the socket on the logic board. Prying on the socket may cause it to separate from the logic board.

  • Gently fold the cable up and out of the way of the logic board.

用撬棒的尖头把右扬声器插头从主板插槽中撬出。

确保你撬的是插头而不是主板上的插槽。要是撬了插槽你有可能把它从主板上撬下来。

轻轻地把排线弯向一边以便稍后取下主板。

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.