Saltar al contenido principal

Aviso: Estás editando una guía de prerrequisito. Cualquier cambio que realices afectará a todas las 7 guías que incluyen este paso.

Inglés
Chino
Paso 3
Use the point of a spudger to flip up the locking mechanism on the I/O board connector. Flip the spudger around and use the flat end to slide the I/O cable out of the connector. Push on the opened locking mechanism for an easy way to slide the I/O cable out of the connector. This could help prevent accidental damage to the cable or connector contacts.
  • Use the point of a spudger to flip up the locking mechanism on the I/O board connector.

  • Flip the spudger around and use the flat end to slide the I/O cable out of the connector.

  • Push on the opened locking mechanism for an easy way to slide the I/O cable out of the connector. This could help prevent accidental damage to the cable or connector contacts.

用撬棒的尖头挑起I/O板连接线的卡扣。

把撬棒翻过来,用平头把I/O排线推出连接器。

把卡扣翻到一个合适的角度再把排线推出连接器。这有助于防止对排线或者连接器接头造成意外伤害。

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.