Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Inglés
Español

Traduciendo paso 1

Paso 1
Disconnect the three airport Antenna cable connectors from their sockets on the AirPort board and bend them up and out of the way. Be careful to pry only against each connector, and not its cable or socket. Be careful to pry only against each connector, and not its cable or socket.
  • Disconnect the three airport Antenna cable connectors from their sockets on the AirPort board and bend them up and out of the way.

  • Be careful to pry only against each connector, and not its cable or socket.

Desconecte los conectores de antena de la placa AirPort de sus zócalos en la junta del AirPort doblándolos hacia arriba y apartándolos

Tenga cuidado de hacer palanca solo contra cada conector, y no su cable o zócalo.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.