Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Partes y herramientas

Aviso: Estás editando una guía de prerrequisito. Cualquier cambio que realices afectará a todas las 8 guías que incluyen este paso.

Inglés
Japonés

Traduciendo paso 1

Paso 1
Use a T5 Torx driver to remove the following three screws securing the right fan to the logic board:
  • Use a T5 Torx driver to remove the following three screws securing the right fan to the logic board:

  • One 5.0 mm screw with a 2.0 mm long shoulder

  • One 4.0 mm screw with a wide head

  • One 4.4 mm screw

基板に右側ファンを取り付けている次のネジを外します。

5.0 mm T5トルクスネジー1本

4.0 mm T5トルスクスネジー1本

4.4 mm T5トルクスネジー1本

[* black] RemoveUse a T5 Torx driver to remove the following three screws securing the right fan to the logic board:
[* red] One 5.0 mm T5 Torx screw with a 2.0 mm long shoulder
[* orange] One 4.0 mm T5 Torx screw with a wide head
[* yellow] One 4.4 mm T5 Torx screw
[* black] RemoveUse a T5 Torx driver to remove the following three screws securing the right fan to the logic board:
[* red] One 5.0 mm T5 Torx screw with a 2.0 mm long shoulder
[* orange] One 4.0 mm T5 Torx screw with a wide head
[* yellow] One 4.4 mm T5 Torx screw

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.