Aviso: Estás editando una guía de prerrequisito. Cualquier cambio que realices afectará a todas las 18 guías que incluyen este paso.
Traduciendo paso 2
Paso 2
-
Remove the following eight screws:
-
One 4.5 mm Phillips near the modem.
-
Three 6 mm Phillips near the display.
-
Two large 7.5 mm Phillips with attached springs.
-
Two 13 mm Phillips, one on the lower left side of the heat sink and one between the fan and the optical drive.
Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.