Saltar al contenido principal
Inglés
Español

Traduciendo paso 9

Paso 9
use the buttons to put it in the new digitizer. connect the flex cable to the board of the lcd screen. ( i forgot to take a picture of this , my apologies ) connect the flex cable again to the Phone ( where the plastic lid and screw was..)
  • use the buttons to put it in the new digitizer.

  • connect the flex cable to the board of the lcd screen. ( i forgot to take a picture of this , my apologies )

  • connect the flex cable again to the Phone ( where the plastic lid and screw was..)

  • put the digitizer again over the lcd screen. see that it is in the correct place.

  • these are the steps to follow. sometimes it is hard to see things on the pictures so again there is a good youtube movie from the guys from smartfastfix... see link in step 2 or 3 .

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.