Saltar al contenido principal
Inglés
Español
Paso 2
Disconnect the two newly-revealed temperature sensor connectors and the fan connector from the logic board. These connectors move up, not towards the rear of the case, and can be lifted with gentle pressure from under the cable. On Santa Rosa/Penryn models, there is only one temperature sensor connector containing all four leads.  See second picture.
  • Disconnect the two newly-revealed temperature sensor connectors and the fan connector from the logic board. These connectors move up, not towards the rear of the case, and can be lifted with gentle pressure from under the cable.

  • On Santa Rosa/Penryn models, there is only one temperature sensor connector containing all four leads. See second picture.

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.