Saltar al contenido principal
Inglés
Español
Paso 2
Unscrew the Torx #8 screws holding the hard drive case in place on the logic board. Lift up on the hard drive to disconnect its ribbon cable from the logic board, just like in the previous steps.
  • Unscrew the Torx #8 screws holding the hard drive case in place on the logic board.

  • Lift up on the hard drive to disconnect its ribbon cable from the logic board, just like in the previous steps.

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.