Aviso: Estás editando una guía de prerrequisito. Cualquier cambio que realices afectará a todas las 6 guías que incluyen este paso.
Traduciendo paso 1
Paso 1

Duplexer PCB
-
Disconnect one cable from the main board of the printer.
-
Disconnect the duplexer solenoid cable from the duplexer PCB.
-
Remove one screw on the duplexer PCB and remove the PCB from the printer.
Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.