Saltar al contenido principal
Inglés
Español
Paso 6
Remove the remaining eight 10 mm screws using the Phillips Head screwdriver. To remove the board from the case pull the board up and away from the audio jack holes to allow the audio jacks to slide out of their holes in the side of the backing. To remove the board from the case pull the board up and away from the audio jack holes to allow the audio jacks to slide out of their holes in the side of the backing.
  • Remove the remaining eight 10 mm screws using the Phillips Head screwdriver.

  • To remove the board from the case pull the board up and away from the audio jack holes to allow the audio jacks to slide out of their holes in the side of the backing.

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.