Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Aviso: Estás editando una guía de prerrequisito. Cualquier cambio que realices afectará a todas las 2 guías que incluyen este paso.

Inglés
Español

Traduciendo paso 6

Paso 6
Remove the joysticks from the circuit board by carefully pull the rubber thumbsticks off of the electronic bearings. (Bearings are indicated in picture on the left by the starts of the red arrows) With the old joysticks removed, the controller is now ready for new replacements.
  • Remove the joysticks from the circuit board by carefully pull the rubber thumbsticks off of the electronic bearings. (Bearings are indicated in picture on the left by the starts of the red arrows) With the old joysticks removed, the controller is now ready for new replacements.

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.