Saltar al contenido principal
Inglés
Español
Paso 9
Connect the new housing and new wire to the back side of the circuit board. The wire should come out from the top of the controller. The order of the wires (from left to right) is: black, green, white, red.
  • Connect the new housing and new wire to the back side of the circuit board. The wire should come out from the top of the controller.

  • The order of the wires (from left to right) is: black, green, white, red.

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.