Saltar al contenido principal
Inglés
Español

Traduciendo paso 1

Paso 1
Use a plastic opening tool to gently pry the end of the camera's black ribbon cable (opposite the camera lens) off of the motherboard. Once the cable is free, use tweezers to pull the camera from the body. The camera may be stuck in place with a piece rubber foam. Take care to not damage the camera by applying too much pressure.
  • Use a plastic opening tool to gently pry the end of the camera's black ribbon cable (opposite the camera lens) off of the motherboard.

  • Once the cable is free, use tweezers to pull the camera from the body.

  • The camera may be stuck in place with a piece rubber foam. Take care to not damage the camera by applying too much pressure.

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.