Saltar al contenido principal
Inglés
Español
Paso 3
Remove the protective plate on the bottom of the housing. The plate is held in place by a series of snaps and magnets. Use the flat end of a spudger to begin dislodging the snaps, starting at the opposite end of the charging port.
  • Remove the protective plate on the bottom of the housing.

  • The plate is held in place by a series of snaps and magnets.

  • Use the flat end of a spudger to begin dislodging the snaps, starting at the opposite end of the charging port.

  • Work evenly around the circumference of the housing, until all snaps are free.

  • Lift the plate off of the housing.

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.