Saltar al contenido principal

Aviso: Estás editando una guía de prerrequisito. Cualquier cambio que realices afectará a todas las 10 guías que incluyen este paso.

Inglés
Chino
Paso 6
Remove the 2.5 mm Phillips #000 screw securing the logic board near the power button.
  • Remove the 2.5 mm Phillips #000 screw securing the logic board near the power button.

  • Remove the 4.8 mm standoff screw near the headphone jack.

  • Standoff screws are best removed using an iPhone Standoff Screwdriver Bit and driver handle.

  • In a pinch, a small flathead screwdriver will do the job—but use extra caution to ensure it doesn't slip and damage surrounding components.

移除 2.5 mm十字 #000 号螺丝

移除在耳机口附近的 4.8 mm专用压铆螺柱螺丝

你可以通过专用的压铆螺柱螺丝刀螺丝刀组更轻松地卸下它们。

简单说来,一个小的平头螺丝刀可以做到——但是需要额外的小心,来保证不损坏周围的部件。

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.