Saltar al contenido principal
Inglés
Español
Paso 5
Use a flathead screwdriver or spudger to tilit the logic board to an angle so you can grab it with your hands Holding the logic board by it edges, lift it up slightly. And remove
  • Use a flathead screwdriver or spudger to tilit the logic board to an angle so you can grab it with your hands

  • Holding the logic board by it edges, lift it up slightly.

  • And remove

  • Thats all. The logic board has been removed. Just follow the steps (Step 1-5 in reverse to install the board)

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.