Saltar al contenido principal
Inglés
Español
Paso 4
Using a screwdriver (flathead) or a spudger, pull the power cable out of the logic board Now with a spudger or flathead screw driver, CAREFULLY remove the LED connector. Do this very carefully as this connector is extreme fragile, and easily damaged.
  • Using a screwdriver (flathead) or a spudger, pull the power cable out of the logic board

  • Now with a spudger or flathead screw driver, CAREFULLY remove the LED connector. Do this very carefully as this connector is extreme fragile, and easily damaged.

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.