Repara tus cosas

Derecho a reparar

Tienda

Volver a la Guía
Inglés
Español
Paso anterior

Traduciendo paso 3

Paso 3
Undo the grey clip that holds the LCD ribbon in place by loosening one side of the clip with the plastic opening tool, then gently separate the other side of the clip from the holder. The copper end of the ribbon should slide out of the housing as you pull the LCD up and away from the motherboard. Using too much force may bend the copper ribbon.

  • Undo the grey clip that holds the LCD ribbon in place by loosening one side of the clip with the plastic opening tool, then gently separate the other side of the clip from the holder.

  • The copper end of the ribbon should slide out of the housing as you pull the LCD up and away from the motherboard.

  • Using too much force may bend the copper ribbon.

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.