Saltar al contenido principal
Inglés
Español
Paso 2
Use the tip of a spudger to push the sides of the ZIF connector fastener securing the spindle motor ribbon cable directly away from the connector. Disconnect the spindle motor ribbon cable by pulling it straight out of its connector with a pair of tweezers. Disconnect the spindle motor ribbon cable by pulling it straight out of its connector with a pair of tweezers.
  • Use the tip of a spudger to push the sides of the ZIF connector fastener securing the spindle motor ribbon cable directly away from the connector.

  • Disconnect the spindle motor ribbon cable by pulling it straight out of its connector with a pair of tweezers.

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.