Saltar al contenido principal
Inglés
Español
Paso 7
There is a rubber pad covering the bottom attached by an adhesive. To get into the base station, you have to peel the pad off.
  • There is a rubber pad covering the bottom attached by an adhesive. To get into the base station, you have to peel the pad off.

  • There are five Phillips #0 screws underneath the pad you need to remove.

  • The numbers on the bottom are: FCC ID BCGA1143, IC: 579C-A1143, Model Number A1143.

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.