Saltar al contenido principal
Inglés
Español

Traduciendo paso 8

Paso 8
Using the Phillips head bit, remove the silver screw near the top edge of the board. Separate the LCD assembly by pulling it away. You should have the bare motherboard! Separate the LCD assembly by pulling it away. You should have the bare motherboard!
  • Using the Phillips head bit, remove the silver screw near the top edge of the board.

  • Separate the LCD assembly by pulling it away. You should have the bare motherboard!

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.