Traducir paso # 1 - Disassembling Speak And Spell Case - iFixit

Repara tus cosas

Derecho a reparar

Tienda

Aviso: Estás editando una guía de prerrequisito. Cualquier cambio que realices afectará a la guía que incluye este paso.

Volver a la Guía

Inglés

Español

Traduciendo paso 1

Paso 1

Flip the toy over, so that the keypad is facing away from you.

Remove two Phillips-head screws.

Flip the toy over, so that the keypad is facing away from you.
Remove two Phillips-head screws.
Insert a plastic spudger (or 4!) into the marked holes, and push down and towards the edge to release each catch.
It's possible to release each catch one-at-a-time, but easier if you have 4 tools and do them simultaneously.
This requires quite a bit of force; be careful.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.