Saltar al contenido principal
Inglés
Español

Traduciendo paso 3

Paso 3
Use a soldering iron to melt the solder attaching the wires to the circuit board. The positive lead is attached at the middle right of the board, while the negative lead is attached at the bottom right of the board.
  • Use a soldering iron to melt the solder attaching the wires to the circuit board.

  • The positive lead is attached at the middle right of the board, while the negative lead is attached at the bottom right of the board.

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.