Aviso: Estás editando una guía de prerrequisito. Cualquier cambio que realices afectará a la guía que incluye este paso.
Traduciendo paso 1
Paso 1

-
You should now see the EMI filter right in the middle of the device (although held in by a few other components).
-
Follow the wires coming out of the bottom of the Power adapter off to the left.
-
Take the tweezers and remove the piece of tape holding the wires to the casing.
-
There is only one connector that needs to be taken out (even though there are two right next to each other!).
-
Grab the connector from the bottom and pull it carefully from its corresponding socket.
Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.