Saltar al contenido principal
Inglés
Español
Paso 13
After heating up the adhesive on the heat sink with a heat gun, a spudger may be used to pry it off the motherboard with little trouble. After heating up the adhesive on the heat sink with a heat gun, a spudger may be used to pry it off the motherboard with little trouble.
  • After heating up the adhesive on the heat sink with a heat gun, a spudger may be used to pry it off the motherboard with little trouble.

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.