Saltar al contenido principal
Inglés
Español
Paso 6
Remove the three 6mm T8 torques screws that hold the dock connector together and pull the top and bottom pieces apart. There are some small parts that may fall out when the plastic pieces are separated. To minimize this, lay the piece with the dock connector facing down.
  • Remove the three 6mm T8 torques screws that hold the dock connector together and pull the top and bottom pieces apart.

  • There are some small parts that may fall out when the plastic pieces are separated. To minimize this, lay the piece with the dock connector facing down.

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.