Saltar al contenido principal

Aviso: Estás editando una guía de prerrequisito. Cualquier cambio que realices afectará a la guía que incluye este paso.

Inglés
Alemán
Paso 4
Locate and unscrew the four 3 mm screws using the Phillips #00 screwdriver. Unscrew the one T5 Torx screw using the special T5 Torx screwdriver head. The 2 mm T5 Torx screw is located on the motherboard near the antenna clip.
Remove Screws
  • Locate and unscrew the four 3 mm screws using the Phillips #00 screwdriver.

  • Unscrew the one T5 Torx screw using the special T5 Torx screwdriver head.

  • The 2 mm T5 Torx screw is located on the motherboard near the antenna clip.

  • If you aren't equipped with the T5 Torx screwdriver, you could try using your fingers, although it will be very difficult to remove it.

Drehe die vier 3 mm Kreuzschlitzschrauben #00 heraus.

Drehe die einzelne Torx T5 Schraube heraus.

Diese 2 mm Torx T5 Schraube befindet sich auf der Hauptplatine in der Nähe der Antennenklammer.

Wenn du keinen T5 Schraubendreher hast, kannst du es mit deinen Fingern probieren, das wird aber sehr schwierig.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.