Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Inglés
Español

Traduciendo paso 6

Paso 6
Using the picks located in the iOpener Kit, insert the picks into the corners of the tablet, and move it back and forth along the sides of tablet. Do this for every corner of the tablet until it is possible to pull the LCD from the display assembly with your finger. Carefully remove the LCD from the display assembly because there is a ribbon located at the bottom that could be ripped with force.
  • Using the picks located in the iOpener Kit, insert the picks into the corners of the tablet, and move it back and forth along the sides of tablet.

  • Do this for every corner of the tablet until it is possible to pull the LCD from the display assembly with your finger.

  • Carefully remove the LCD from the display assembly because there is a ribbon located at the bottom that could be ripped with force.

  • The LCD should come completely free from the back assembly now by just leading the ribbon through the opening in the display assembly.

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.