Saltar al contenido principal

Aviso: Estás editando una guía de prerrequisito. Cualquier cambio que realices afectará a todas las 6 guías que incluyen este paso.

Inglés
Italiano

Traduciendo paso 1

Paso 1
Power down your device. Use your plastic opening tool to wedge between the seams around the sides of the device. Pry open each side, one at a time.  For some a finger nail may be best. The case comes up quite high to the glass.
  • Power down your device.

  • Use your plastic opening tool to wedge between the seams around the sides of the device. Pry open each side, one at a time. For some a finger nail may be best. The case comes up quite high to the glass.

  • Do not pry near the USB port at the base of the device as you may crack the rear panel.

Spegni il telefono.

Incunea il tuo strumento di apertura in plastica nella giunzione tra le due facce del dispositivo. Fai leva e apri un lato alla volta.

Non far leva vicino alla porta USB alla base del dispositivo, perché potresti rompere il pannello posteriore.

[* black] Power down your device.
-[* black] Use your plastic opening tool to wedge between the seams around the sides of the device. Pry open each side, one at a time.
+[* black] Use your plastic opening tool to wedge between the seams around the sides of the device. Pry open each side, one at a time. For some a finger nail may be best. The case comes up quite high to the glass.
[* icon_caution] Do not pry near the USB port at the base of the device as you may crack the rear panel.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.