Saltar al contenido principal

Aviso: Estás editando una guía de prerrequisito. Cualquier cambio que realices afectará a todas las 4 guías que incluyen este paso.

Inglés
Español
Paso 3
With the laptop's bottom facing up, pull the optical drive release lever back and pull the optical drive out. Unscrew the three M2x3mm Phillips head screws shown. At the front edge of the laptop, empty the SD card holder by pressing on the card. This will allow for further disassembly in later steps.
Remove Optical Drive
  • With the laptop's bottom facing up, pull the optical drive release lever back and pull the optical drive out.

  • Unscrew the three M2x3mm Phillips head screws shown.

  • At the front edge of the laptop, empty the SD card holder by pressing on the card. This will allow for further disassembly in later steps.

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.