Saltar al contenido principal

Aviso: Estás editando una guía de prerrequisito. Cualquier cambio que realices afectará a todas las 6 guías que incluyen este paso.

Inglés
Español

Traduciendo paso 3

Paso 3
With tweezers, remove the rubber protector on the lower part of the phone. Disconnect the battery connector by gently prying it straight up with a spudger, on the side opposite the cable. Completely separate the battery side from the motherboard side by gently pulling the sides apart with your hands.
  • With tweezers, remove the rubber protector on the lower part of the phone.

  • Disconnect the battery connector by gently prying it straight up with a spudger, on the side opposite the cable.

  • Completely separate the battery side from the motherboard side by gently pulling the sides apart with your hands.

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.