Saltar al contenido principal

Aviso: Estás editando una guía de prerrequisito. Cualquier cambio que realices afectará a todas las 8 guías que incluyen este paso.

Inglés
Chino

Traduciendo paso 8

Paso 8
Slightly tilt the steel mid plane to dislodge it from the rear case. Be careful not to tear the piece of copper tape connecting the rear-facing camera to the steel mid plane.
  • Slightly tilt the steel mid plane to dislodge it from the rear case.

  • Be careful not to tear the piece of copper tape connecting the rear-facing camera to the steel mid plane.

  • Lift the steel mid plane up off the rear case and peel off the piece of copper tape stuck to the rear-facing camera.

稍微倾斜钢板,将它从后壳中取出。

注意不要撕开将后置摄像头连接到钢板中间平面的连接带。

将钢板从后壳提起,然后剥下粘在后置相机上的连接带。

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.