Saltar al contenido principal
Inglés
Español
Paso 7
Lift board up slightly to reveal 2 ribbon flex and 1 wire connector still attached beneath board-remove flex before lifting board off completely.
  • Lift board up slightly to reveal 2 ribbon flex and 1 wire connector still attached beneath board-remove flex before lifting board off completely.

  • Remove bottom flex first.

  • Then use fingernails to gently pull out wire connector from lens.

  • And slide tabs on connectors from lens/shutter and lens screen horizontally away from board and then slide flex cables free.

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.