Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Inglés
Español
Paso 5
If the printer is plugged in while the printhead is removed, the calibration data may be erased. Verify the printer is unplugged FIRST! When the printer is unplugged, lift the lever up and remove the printhead. Remove the printhead as shown. IMPORTANT: Leave the scanner lid open to indicate there is no printhead.
Remove the printhead (See calibration warning)
  • If the printer is plugged in while the printhead is removed, the calibration data may be erased. Verify the printer is unplugged FIRST!

  • When the printer is unplugged, lift the lever up and remove the printhead.

  • Remove the printhead as shown. IMPORTANT: Leave the scanner lid open to indicate there is no printhead.

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.