Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Inglés
Español
Paso 8
Wait until the printhead is bone dry to install it, since the calibration will be erased if the printer errors out. New printhead preparation uses A LOT of ink (1/2 non-XL OR 1/4 XL). The printer will run a unavoidable Printhead Preparation process when power is applied. Once the printhead is satisfactorily dry, reinstall the printhed and ink in the printer. Plug the printer in.
Reinstall the printhead and ink
  • Wait until the printhead is bone dry to install it, since the calibration will be erased if the printer errors out. New printhead preparation uses A LOT of ink (1/2 non-XL OR 1/4 XL).

  • The printer will run a unavoidable Printhead Preparation process when power is applied.

  • Once the printhead is satisfactorily dry, reinstall the printhed and ink in the printer. Plug the printer in.

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.