Saltar al contenido principal
Inglés
Español
Paso 10
I un-clipped the two rubberised connectors for the USB connector and the SD card, this made it easier for the system board to be removed. I used an opening device to lift the system board from right hand side edge of the phone (it comes out easier from this end). I used an opening device to lift the system board from right hand side edge of the phone (it comes out easier from this end).
  • I un-clipped the two rubberised connectors for the USB connector and the SD card, this made it easier for the system board to be removed.

  • I used an opening device to lift the system board from right hand side edge of the phone (it comes out easier from this end).

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.