Saltar al contenido principal
Inglés
Español
Paso 4
Remove the four T10 Torx screws. Slide the cover towards the back of the enclosure and remove.  There is a small dot of lock-tite on each screw, fyi. The third image is unnecessary, but if you quickly mouse over the second and third images it kinda makes it look animated.
  • Remove the four T10 Torx screws.

  • Slide the cover towards the back of the enclosure and remove. There is a small dot of lock-tite on each screw, fyi.

  • The third image is unnecessary, but if you quickly mouse over the second and third images it kinda makes it look animated.

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.